U.2 (SFF-8639) SAS/PCIe 3.0 connectors are designed for next generation storage application with SAS 12Gb/s and PCIe 8Gb/s per lane. The molded guide posts allow device plug and receptacle to self-align during mating process.
- Capable of meeting 12Gb/s SSDs and HDDs or PCle
based devices at 8Gb/s
- Footprint backward compatible with 6G and 3G SAS connectors
- Durability 500 mating cycles
- SAS/PCIe connectors enable SFF8630, SFF 8680 and SFF8432 interfaces
- Backward compatible with 6Gbps SAS, SATA and
3Gbps SFF8482 connectors
- Supports both SAS and SATA drives
- Supports up to 4 ports PCIe based devices
- Staggered contact lengths
- Stamped clips act as connector retainers for robust
PCB attachment
- Molded guide posts help mating halves to self-align by providing angled lead-in
- Implementation of high speed SSDs (Solid State Drives) and HDDs (Hard Disk Drives) allows compatibility between unshielded dual and multiport interfaces
- Same interface can be used for cost-effective storage HDD as well as higher performance server
- Address the needs of both mission critical and bulk storage applications
- Provide sequential contact mating for hot plugging
- Provide additional mechanical strength after soldering
- Compensates for connector misalignment
- Housing : high temperature thermoplastic
UL 94V-0
- Contact : copper alloy
- Fitting nail : copper alloy(Plug)
- Ground: stainless steel(Plug)
- Hold down: copper alloy(Receptacle)
- Contact finish: ive gold plating over nickel
- Fitting nail finish: matte tin over nickel
- Hold down finish: matte tin over nickel
- Current rating: 1.5A/pin
- Voltage rating: 30V DC
- Insulation resistance: 1000MΩ min.
- Dielectric withstanding voltage: 500VAC
- Contact resistance: initial 30mΩ max. after stress 45mΩ max.
- Impedance: 100 Ω ±15%, Rise time 0ps(10%~90%)
- Temperature range: -40oC ~ +85oC
- Humidity: 40±2oC, 90~95%RH for 96hrs
- Salt spray : 35±2oC, 5±1% density salt for 48hrs
- Mating force: Max. 59N
- Un-mating force: Min. 5N
- Durability: 500 cycles
- Vibration: 1us (max.) by EIA 364-28 Condition VII
- Mechanical shock: 1us max. by EIA 364-27 Condition A
料號 | 公母座 | 間距(mm) | Pin數 | 產品板上高度(mm) | 對接方向 | 焊板型式 | 卡板設計 | 焊接製程 | 包裝 |
---|---|---|---|---|---|---|---|---|---|